Authors must follow guide for authors strictly, failing which the manuscripts would be rejected without review. Editors reserve the right to adjust the style to certain standards of uniformity.
Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Introduction, Materials and Methods, Results and Discussion, Conclusions, Acknowledgements, References, Figure Captions, Tables and Figures. The corresponding author should be identified with an asterisk and footnote. All other footnotes (except for table footnotes) should be avoided. Collate acknowledgements in a separate section at the end of the article and do not include them on the title page, as a footnote to the title or otherwise.
Use double spacing and wide (3 cm) margins on white paper. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables and figure legends on separate pages at the end of the manuscript. The text must be of 12 pt font size with standard fonts.
Maximum page length should be within 15 pages for Original article and 5 pages for Short Communication and 20 pages for review paper, including text, references, tables and figures. Each figure and table must be put separately on a single page.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
A Theory section should extend, not repeat, the background to the article already explained within the introduction and provide the foundation for further work. In contrast, a calculation section represents a practical development from a theoretical basis.
Results should be clear and concise, and be part of a single section, discussing the significance of the results of the work, not repeat them. Extensive citation and discussion of the published literature should be avoided.
The main conclusions drawn from results should be presented in a short Conclusions section (maximum 100 words).
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
A concise and factual abstract is required. Each paper should be provided with an abstract of about 100-150 words. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
A Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum of 531 x 1328 pixels (h x w) or proportionally more. The image should be readable at a size of 5 x >/
Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point).
Immediately after the abstract, provide a maximum of 5 keywords to be included in an article, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Indicate each footnote in a table with a superscript lowercase letter.
Electronic artwork General points.
Maximum 20, 35 and 75 references for short communication, original research paper/case study and review papers, respectively.
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Should be numbered consecutively in the order in which they are first mentioned in the text (not in alphabetic order). Identify references in text, tables and legends by Arabic numerals in brackets. References-cited only in tables or figure legends should be numbered in accordance with the sequence established by the first identification in the text of the particular table or figure.
Reference to a journal publication: Aroulmoji,V ., Mathlouthi,V., Feruglio, F., Murano, E., Grassi, M., 2012. Hydration Properties and Proton Exchange in Aqueous Sugar Solutions Studied by Time Domain Nuclear Magnetic Resonance. Food Chemistry, 132, 1644-1650.
Bakshi, U.A., Bakshi, M.V., 2011. Electrical Machines-I, second ed. Technical Publications, India, pp. 281-304.
Roge, B., Aroulmoji, V., Mathlouthi, M. 2006. FT-IR study of the hydration of caffeine, sucrose and their mixtures in Water. Maria del Pilar Buera, Taylor & Francis (Eds), Water properties of food, pharmaceutical and biological materials, pp. 281-304.
The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
One author has been designated as the corresponding author with contact details: